Challenge & solution
Optimizing the current aluminium recycling processes and maximizing circularity
The Challenge
- Aluminium is a cornerstone of sustainable metallurgy: recycling one tonne saves the greenhouse gas emissions of driving 40,000 miles. But scrap arrives coated in paints, oils, oxides and plastics, and carries inorganic impurities that have to be refined out before the metal is usable.
- Industry deals with this using hazardous fluxing salts. They work — but they generate salt slag, a hazardous waste that is reactive with moisture and difficult to dispose of safely. They release VOCs, dioxins, hydrogen chloride and fine particulates. They expose operators to chemical burns, thermal injury and reactive dusts. And the decomposition of organic contamination creates a genuine explosion risk, severe enough that furnace charge doors have been dislodged from their hinges.
What CLEANMAT aims to do
- CLEANMAT reimagines the entire value chain rather than optimising one step of it. Contaminants are identified before they enter the furnace, removed by closed-loop thermal cleaning, and the remaining refining is done with a fraction of the flux currently required — under 1.5 kg per tonne in induction furnaces, and under 5.0 kg per tonne in the furnace types already installed across the industry.
- A digital thread runs through all of it, linking sensor data, process parameters and quality outcomes so that each stage can be optimised against real evidence. The technologies are validated at TRL6 under industrially relevant conditions, and the results benchmarked through life cycle assessment and techno-economic analysis.
The Mission Statement
To make aluminium recycling clean at industrial scale — removing the hazardous chemistry from the process without compromising the quality of the metal that comes out of it.
Aluminium is one of the most recyclable materials Europe has, and one of the most important for a net-zero industrial base. Yet the way it is recycled still relies on chemistry that harms workers, produces hazardous waste and releases pollutants that are expensive to contain.
CLEANMAT exists to prove that this is a solvable engineering problem rather than an unavoidable cost of doing business. The project develops the sensing, cleaning, refining and digital technologies that together make near-flux-free recycling viable — and validates them under real industrial conditions, on real scrap, producing parts to automotive specification.
Five objectives,
from evidence
to policy
Develop a scalable, secure industrial internet of things architecture that connects every stage of the process in near real time, links to digital twins at each processing step, and drives a decision support system with dashboards designed for the people actually operating the plant.
Develop an advanced characterisation system combining computer vision, 3D laser geometry mapping, laser-induced breakdown spectroscopy and magnetic induction spectroscopy — identifying contaminants on a conveyor running at one metre per second, with over 95% detection accuracy.
Develop closed-loop thermal pre-treatment that removes organic contamination — oils, greases, coatings, food residues — before the metal reaches the furnace, with near-total destruction of the volatile organic compounds released, and waste heat recovered back into the process.
Cut fluxing agent use by more than 97%, to 1.5 kg per tonne, in induction furnaces. Magnetohydrodynamic flow conditioning floats out oxides and inclusions, and vacuum distillation polishes the alloy to remove alkali metals — replacing salt chemistry with physics.
Cut fluxing agent use by more than 90%, to 5.0 kg per tonne, across the rotary, reverberatory and crucible furnaces that still dominate the industry — as a retrofit to plant already in service, so the benefit does not wait for the next capital cycle.
Work Packages
| WP | Title | Lead | Months |
|---|---|---|---|
| WP1 | Industrial requirements and specifications | Lead Doktas | Duration M1–M30 |
| WP2 | Digital thread enabled process design and parameters optimisation | Lead TEKNOPAR | Duration M1–M18 |
| WP3 | Scrap characterisation and contaminant identification | Lead Fraunhofer | Duration M4–M18 |
| WP4 | Scrap pre-treatment and cleaning | Lead NTNU | Duration M4–M18 |
| WP5 | Near-zero flux melt refining (induction furnace) | Lead Otto Junker | Duration M4–M18 |
| WP6 | Ultra-low flux melt refining (all other furnace types) | Lead Brunel University London | Duration M4–M18 |
| WP7 | Sub-systems integration, optimisation and validation | Lead Brunel University London | Duration M19–M30 |
| WP8 | Demonstration of the CLEANMAT process and case study validation | Lead Doktas | Duration M18–M36 |
| WP9/10 | Life cycle assessment and techno-economic analysis | Lead IRES | Duration M1–M36 |
| WP11/12 | Dissemination, exploitation and communication | Lead Recycling Europe | Duration M1–M36 |
| WP13/14 | Project management | Lead Brunel University London | Duration M1–M36 |
Horizon Europe Framework
-
EU Funding Framework
CLEANMAT is a Horizon Europe Research & Innovation Action (RIA) funded under Cluster 4 (Digital, Industry and Space) within the Processes4Planet Partnership.
-
Execution & Leadership
Led by Brunel University London (United Kingdom) and executed by a 17-partner consortium spanning 8 countries.
-
Timeline & Budget
Runs for 36 months (1 June 2026 – 31 May 2029) under Grant Agreement No. 101294748, with a total EU contribution of €7,325,420.90.
-
Industrial Validation
Technologies are validated at Technology Readiness Level 6 (TRL6) under industrially relevant conditions and benchmarked through rigorous Life Cycle Assessment (LCA), Techno-Economic Analysis (TEA), and occupational safety benchmarking.
Project facts
- Full title
- Smart Clean Aluminium Material Processing — Digital Sorting, Intelligent Pre-treatment, and Advanced Melt Refining
- Acronym
- CLEANMAT
- Programme
- Horizon Europe — Cluster 4, Processes4Planet partnership
- Call / Topic
- HORIZON-CL4-2025-01 / CL4-INDUSTRY-2025-01-TWIN-TRANSITION-36
- Type of action
- Innovation Action (IA), lump sum grant
- Start date
- 1 June 2026
- End date
- 31 May 2029
- Duration
- 36 months
- Coordinator
- Brunel University London, United Kingdom
- Partners
- 17, across 8 countries
- EU contribution
- €7,325,420.90
